Top 10 Rated expandable baton holster in 2022 Comparison Table
- Military Grade Polymer Materials
- Tool-free adjustment.
- Open-top design for fast access
- 360° rotation
- Tension adjustable in only one screw
- The baton holder is workable as a baton sized from 16-26”, or holds a torch with diameter 31.7mm (1.25inch)
- The baton can be rotated 360 degrees with 16 locking positions, steadily fixed in the holder.
- The special clamping buckle enables it fit on the belt with just one hand without unbuckling the belt.
- Holds Torch Diameter. The torch comes with a diameter of 31.7mm (1.25 inch), suitable for batons 0.98" to 1.14" (2.5 cm to 2.9 cm) diameter.
- Expandable baton holsters are easy to assemble and disassemble. Rotate the switch to unlock, easily buckle the belt, no need to unlock the belt.
- FITS FOR MOST BATON: Baton Holster is workable for expandable baton with size from 16-26", fits a torch/flashlight with diameter 0.98"-1.14"(25mm-29mm).
- ADJUSTABLE WAISTBAND WIDTH: Baton holster for the duty belt has an adjustable belt-clip to adjust the waistband width from 1.22"-2.24"(3mm-7mm). Capable of being mounted onto a duty belt, shooters belt, military or duty belts.
- 360 DEGREE ROTATING WITH 12 POSITIONS: Baton holder case has a 360-degree rotating belt clip that swivels to 12 distinct positions for optimum carry and draws, or maybe locked in place.
- LIGHTWEIGHT AND DURABLE: Extendable baton holder is made from durable Polycarbonate material, with an alluring black Polymer finish. Remains securely retained during dynamic confrontations.
- CONVENIENT FOR MOST USER: A convenient clamping buckle lock allows you quickly release and mount the baton holder from your belt. Designed for those officers who prefer a closed front case compact, reduced form carrier for the Tactical Baton, quick access to it.
- Fits: Tactical 16" and 21" Expandable Batons
- Open top design for easy access to baton up to 21 inch
- High quality, high density foam center
- Molded Trilaminate construction with strong Ballistic Nylon exterior and soft lining
- Dual web belt loop design accommodates both 2" (50mm) and 2.25" (58mm) belt widths
- Designed to hold 21" to 26" expandable batons which are less than 1.2" in diameter. Size of baton holster: Height: 5.9“ / 15cm; Top opening internal diameter: 1"-1.2" / 2.7cm-3cm. Weight: 4.4oz / 124g. 360 Degree Rotating Clip with hook&loop closure, your baton can be ROTATED 360 degrees with 8 locking positions, steadily fixed in the holder. Fits 1.5"/1.75"/2"/2.25" duty/tactical/gun/security/police/patrol/civilian belt.
- Dotacty baton holder is contour-molded from durable nylon, lightweight and providing a secure, close fit and helping it to resist wear and damage effectively. Reinforced seams provide added durability. Low rattle design for a stable, quiet carry. This baton carrier offers the quick dependable weapon access law enforcement professional depend on to do their job.
- Open top design for quick access and removal, vertical orientation allow users to quickly draw their weapon without being slowed down by unnecessary restraints. The perfect way for law enforcement professionals to easily access their baton in a matter of seconds. Easy to carry an essential self-defense tool on your belt, hands-free. And integrates easily into your existing loadout.
- Hook & Loop adjustable opening. It holds the baton tightly, preventing it from being easily drawn out by others. Even if the diameter of the baton pouch is slightly larger than the diameter of your baton, you don't have to worry about the baton falling out while running or fighting, it would still take a pretty intentional movement to get it to fall out. And it can still be operated with one hand.
- This baton case can also hold flashlights, folding knives and other gadgets of similar shape & size. Not only duty gear essentials for police, sheriff, cop, law enforcement, corrections/detentions/public safety officer, armed guard, armed security, prison guards etc, but also good accessories for personal protection, self-defense. High-quality, professional baton holder for duty belts ensuring that you have your gear secured but readily available when you need it most.
- Made from durable polycarbonate
- All holders feature a molded tension spring for baton security
- Fits a 2.25" (58 mm) belt width
- Made in the USA
- Nylon web.
- Fits 21" and 26" .
- 【360° Flexible Rotation】The holster adopts the design of rotating buckle, which can rotate 360 degrees without dead angle. You can put it on the belt as you like, which is very convenient
- [Multi-point buckle structure] The buckle structure adopts a multi-point buckle design, with four buckles on the left and right, two buckles on the upper and lower sides, a total of 6 buckles. When you put the baton in the holster, it doesn't come off easily.
- [Exquisite material selection] The product is made of high-quality nylon engineering plastic material, which has high strength, good flexibility, strong durability and is not easy to be damaged.
- 【Wide Range of Application】It is suitable for 95% of batons in the market. It is recommended that the baton size is 16-26 inches, the diameter is 27-31mm, and the belt width is within 55mm
- 【Light and Portable & Good After-Sales】The weight of the product is only 0.22 pounds, which is very light and easy to carry. At the same time, we have good after-sales service. If you are not satisfied with our products, we promise to refund or return the goods at any time.
- TOUGH AND DURABLE MATERIAL: Baton Holster is made of durable polycarbonate with alluring black Polymer finish. Lightweight durable and expandable.
- ADJUSTABLE CLIP FOR BELT: Baton holster for duty belt with inside special clamping clip to adjust the waistband width from 1.4"-2"(3.5mm-5mm) to fit your different belt. Capable of being mounted onto a duty belt, shooters belt.
- FITMENT FOR MOST BATON: Baton Holder designed for expandable baton, workable for baton with size from 16-26", or holds torch with diameter 0.98"-1.14"(25mm-29mm).
- 360 DEGREE ROTATING: Baton holster has multi-position with molded tension spring allow you swivels to 7 distinct positions or may be locked in place. It enables a very quick drawing of the baton.
- CONVINENT FOR MOST USER: A conventient clamping buckle lock allow you quickly release and mount the baton holder from your belt. Designed for those officers who prefer a closed front case compact, reduced form carrier for the Tactical Baton, quick access to it.
- Baton holder suitable for 99.9% batons, include the batons 0.98" to 1.14" (2.5 cm to 2.9 cm) diameter.
- Made of high quality polycarbonate material, durable for use.
- Come with convenient clamping buckle.
- Adjustable waistband width to fit different belts under 5.5cm, polymer belt loop will clip onto all MOLLE, equipped vests as well as military or duty belts.
- The baton holder could be 360 degrees rotated, It enables a very quick drawing of the baton.
Our Best Choice: Safari01 Quick Locking System Kit with QLS 19 and QLS 22 Polymer-Black
The Safari01 Brief Locking System Kit enables the person to personalize the holster and accessory set up to healthy any condition that could crop up by mounting nearly any Safari01 holster or accessory in proper posture to satisfy your preferences and situational wants.
With this program lets you rearrange equipment rapidly and conveniently without having instruments involving attachment points this sort of as a belt loop, tactical leg shroud or MOLLE looped vest (with the use of MLS 16 Accent Locking Fork). Holstered weapons and components can be taken out without having the removal of apparel like a tactical vest, leg shroud or belt.
This kit arrives with just one QLS 19 Duty Holster Locking Fork and a person QLS 22 Duty Receiver Plate. The Safari01 Rapid Locking Procedure QLS 19 Holster Locking Fork is built to mount immediately to the back of the holster. The QLS 19 can also be made use of on MOLLE webbing loops if it is attached to an MLS 16 Accent Locking Fork which is threaded by way of the MOLLE loops.
This technique enables mounting options to immediately and easily adjust locations and positions of your holstered weapon. The Safari01 Fast Locking Process QLS 22 Receiver Plate is designed to be the mounting platform for the QLS 19 Locking Fork. This plate can be attached to any Safari01 3-hole backpiece (belt slide, paddle, and so on), on to the front of an MLS 16 Accent Locking Fork which is threaded by means of molle loops, or onto pretty much any flat floor with the proper screws (not integrated).
This procedure will give you multiple mounting selections for your holstered weapon. You can mount these receivers plates everywhere you want to securely continue to keep your handgun
Package Dimensions : 9.33 x 5.98 x 2.2 inches 6.84 Ounces
Date Initial Accessible : April 3, 2020
ASIN : B085Q8ZMBL
Incorporates a person each individual of the QLS Locking Fork and QLS 22 Receiver Plate elements
Hardware and Allen wrench bundled
Enables end users to rearrange equipment promptly and conveniently with no the Use of resources
If you’re contemplating of getting far more new gear for your gun in 2022, it may perhaps also be the time for some other updates? If so, test out our in-depth evaluations of the very best AR-15 testimonials and all gun holster critiques or gun scope evaluations