BritLink R1000

Britannia Defence Systems Ltd
Close Move

COFDM Wireless Digital System for 400MHz, 1.3 or 2.4 GHz

Mobile Video Surveillance
Wireless Point-to-Point surveillance
high quality video and stereo-audio

• Video, Stereo-Audio and Data Communication • Non-line-of-Sight Operation • Transmission link for mobile and fixed application • Digital Encryption • Variety of Frequency and output power • Real-time monitoring

APPLICATIONS

  • Wireless Point-to-Point surveillance links with high quality video and stereo-audio
  • Wireless Digital Fixed and Mobile Video Surveillance for
    - traffic, tunnels, public places and buildings - arenas, stadiums, theatres, festivals - airports, ports, container terminals
    - historical and archaeological sites
    - rescue operations, e.g. earthquakes, fires and accidents (tunnel)
    - law enforcements, e.g. police operations, prison surveillance, border control
  • Low cost TV production, mobile or fixed, e.g. LIVE sport events, talk shows
  • High-speed video, voice and data transmission in multi-path environment
  • Point-to-Multipoint video transmission
  • Transmission of seminars to remote areas from schools or universities

KEY FEATURES

  • Wireless applications in 400 MHz-, 1.3 GHz-and 2.4 GHz- frequency band
  • COFDM*- technology used in DVB-T
  • Fully operational under Non-Line-of-Sight transmission
  • MPEG2- video, up to 20 Mbit/s
  • NICAM- stereo-audio
  • Data transmission
  • Antenna Diversity Receiver
  • Provides superior performance in multipath environment
  • Resistance from interference
  • Narrow bandwidth with low side band radiations
  • AES- encryption and scrambling for additional security
  • Indoor and outdoor use
  • Compact and light weight design
  • Easy installation – Plug and Play – any PAL/NTSC camera and monitor
  • WINDOWS© based programming software

(*) CODFM: Coded Orthogonal Frequency Division Multiplex

OPTIONS / RANGE
R1000 may work independently of the electricity network by means of solar power

As an option, up to 4 cameras may be connected to one transmission link

With minimal effort, mobile use of the system with perfect transmission quality, covering a range up to 5000 m can be achieved. 25 km with fixed installed transmission routes are possible

DIGITAL vs. ANALOGUE

 

R1000 Digital

Analogue

Quality

High Quality

Interference Artifacts

Non-Line-of-Sight performance

Excellent

Poor

Mobility performance

Excellent

Poor

Noise immunity

Excellent

Poor

 

Data Communication

Yes

No

 

SYSTEM PARAMETERS

Video:
Compression Standard: MPEG 2 with non DVB modes
Chrominance Profile: 4:2:0
Format: PAL or NTSC
Specification: Rec. ITU_R BT.470-4
Line Standard: 625 (PAL) or 525 (NTSC)
Horizontal Resolution: 704 pixel
Vertical Resolution: 576 at 625 lines Max. or 480 at 525 lines (depending on line standard)
Frame Rates: 25 (PAL) or 29.97 (NTSC)
Video Bit Rates: 1 to 20 Mbit/s
End-to-End-Delay: 40 ms

Audio:
Bitrate: 728 kbit/s
Compression Standard: NICAM
Sampling Frequency: 32 kHz
Frequency Response: 20 Hz to 12 kHz, +/- 0.25 dB
Signal/Noise-Ratio: > 60dB RMS
Crosstalk: > 55 dB
THD: < 0.1%

Data:
Format: RS 232
Max. Bitrate: 38400 baud

General:
Tunability: 1 MHz
Bandwidth: selectable 6, 7 or 8 MHz
Modulation: COFDM 2k carriers, using QPSK or 16QAM 1/2, 2/3
FEC: or 3/4
Guard Interval: 1/32, 1/16, 1/8 or 1/4

ReceiverRECEIVER (R1000-2.4 RX)

General:
Antenna Diversity Input
Down converter-L.O.F. 1.700 at 1.3; 1.880 at 2.4
Receiver Sense Limit: -94 dBm
Receiver Overload Limit:-10 dBm

Video – Output:
Format: Analogue Composite (FBAS)
Output Level: 1 Vpp, +/- 10%
Impedance: 75 :

Audio – Output:
Format: Analogue Stereo, unbalanced 725 mV, +/- 10%
Control: Format:
Protocol: low RS 232, 9600 baud Special control protocol

Power Supply:
ON/OFF Switch with LED Power: 12 VDC (8 – 14V) Power Consumption: 18 W

Connectors:
Power Supply: Lemo 2-pole
Video: BNC
Audio: Lemo 4-pole
Data / Control: Lemo 6-pole
Antenna Input: N

Physical:
Housing: Powder-coated aluminium, Black RAL 9005
Dimensions: 222 x 169 x 82mm (without connectors)
Weight: approx. 2200g
Operation Temperature: -10 to +40°C

TransmitterTRANSMITTER (R1000-2.4 TX10)

Video – Input:
Format: Analogue Composite
Input Level: 1 Vpp, +/- 10%
Impedance: 75:

Audio – Input:
Format: Analogue Stereo, unbalanced
Input Level: 725 mV, +/- 10%
Clip Level: high

Control:
Format: RS 232, 9600 baud
Protocol: Special control protocol

RF-Output:
Power: 10mW (+10 dBm)
Impedance: 50 :
Spurious Emissions: > 50 dBc
Frequency Stability: > 25 ppm

Power Supply: ON/OFF Switch with LED
Power: 12 VDC (8 – 14V)
Power Consumption: 12W active, 2W sleep mode

Connectors:
Power Supply: Lemo 2-pole
Video: BNC
Audio: Lemo 4-pole
Data / Control: Lemo 6-pole
RF-Output: TNC

Physical:
Housing: Powder-coated aluminium, black RAL 9005
Dimensions: 216 x 106 x 32mm (without connectors)
Operation Temperature: -10 to +40°C

Power AmplifierPOWER AMPLIFIER (R1000-2.4PA1000)
General:
RF – Input: 10 mW (10 dBm)
RF – Output: 1000 mW (30 dBm)
Impedance: 50 :

Power Supply:
ON/OFF Switch with LED
Power: 12 VDC (8 – 14 V)
Power Consumption: 12W

Connectors:
Power Supply: Lemo 2-pole
RF-In put: TNC
RF-Output: TNC

Physical:
Housing: Powder-coated aluminium, black RAL 9005
Dimensions: 216 x 82 x 32mm (without connectors)
Weight: approx. 650g
Operation Temperature: -10 to +40°C

RSS