SubscribeIf you want a system that's economical, quick and easy to install and can be used practically anywhere, we recommend AutoGuard.
This covert, portable intruder detection system requires no specialist knowledge and minimal training to use, yet it provides a precise, expandable solution to both indoor and outdoor security needs.
Supplied in a durable, lightweight, waterproof briefcase, giving 5 years of regular operational life and a shelf life of the basic Autoguard Covert Portable Intruder Detection System includes 8 independent wireless detector heads utilising passive infrared technology and a monitoring unit. The detectors can be used internally or externally and are rated to IP66.
Universal fixings allow the detectors to be covertly positioned in virtually any environment from woodland and undergrowth to jungle, desert and urban conditions.
The active 'alarmed zone' covered by each detector is 30m (straight line), with the height of the zone dependent upon the height of the detector location above ground.
Upon sensing a human intrusion into the protected zone, an alarm signal is transmitted from the detector to a mains powered Autoguard Monitoring Unit (MU). This unit is a lightweight mains/battery operated base station that can be sited at any central point within range of the Autoguard detectors.
An 8 zone LED display gives a visual numerical indication on receipt of an alarm signal and activates an integral audio warning sounder. The audio warning can be switched to be continuous, short, or off, and additional outputs are provided to activate external alarms, VCR or CCTV surveillance systems etc.
The system's coding allows multiple systems to operate in close proximity without interference.
Additional Features
- Auto dialler
- Repeater
- Camera
- Mini tripods
- Bungee cords
- Handheld monitor
Detection heads are equipped with lithium batteries, giving 5 years of regular operational life and a shelf life of up to 15 years.
Expendable system allowing for additional monitoring units and detection heads to be added for maximum flexibility.
Deployment
- Perimeter fences
- Car Parks
- Store Equipment
- Warehouses
- Temporary facilities
- Offices
- Munitions Stores
- Bonded Areas
- Fuel Dumps
- Airfields and associated facilities
- Remote premises
- High value equipment in remote locations
- Building sites
Stealth Guard
A top of the range specialist covert system designed to be used by bodyguards, patrolling guards or military personnel for ultimate protection in any environment- yet anyone can use it.
It's a power packed system built for fast deployment and expandable protection.
The Stealthguard is a specialist version of the market leading Autoguard Covert Detection System. Comprising 8 rugged, palm sized, high quality passive infra-red detectors. This system can be easily and quickly deployed from a briefcase, or body worn 'ammunition' style pouches.
Universal fixings allow the detectors to be covertly positioned in virtually any environment, from woodland and undergrowth to jungle, desert and urban conditions.
Upon sensing a human intrusion Into the protected zone, an alarm signal IS transmitted from the detector to a hand held or belt worn control base station, which can be situated up to 1.5km away (depending on operating conditions), illuminating an LED indicator corresponding to the exact zone of penetration.
With user-friendly controls and a simple alarm interface, each detector is identified individually with an additional audio alarm, via a covert earpiece, that spontaneously alerts the user to activity within the protected area.
The system can be expanded to incorporate up to 64 detectors, arranged in zones.
In addition, vibration sensors, smoke alarms, door contacts and personal panic attack alarms can all be controlled from the same hand held base station, making the Stealthguard the versatile answer to internal or external covert detection.
Typical uses for this system are for personnel protection in hostile areas of the world and covert security operations.
Features
- Detection range 30 metres
- 5 years regular detector head use with Lithium Batteries
- 15 year shelf life
- Monitoring Unit 3 year battery life
- Heads incorporate universal mountings for mini tripods and bungee fasteners
- Monitoring Unit provides visual and audio alarm indications. Both can be adjusted and muted
- Audio alarm also through earpiece.
- Detector heads transmit up to 1.5 kilometres line of sight - 300 metres In built up areas
- Waterproof up to IP66
- Supplied in crush-proof, waterproof worn control base carry case (43 x 34 x 11 cm)
- Total weight of system is 3.5kg (plastic head version) or 6.2kg (metal head version) including case
Sentor
This product is used extensively by military and commercial entities throughout the world, providing both temporary and permanent intruder detection solutions.
A number of these units can be deployed to establish a 'virtual'. perimeter, i.e. an invisible ranging fence with each unit covering an 80m section. There is no limit to the number of units deployed.
The unit can be deployed for up to four months with the only requirement being to monitor any alarm/ intruder messages. After this time, or on receiving a low battery warning message, the units battery IS recharged over an 8 to 10 hour period, the Sentor is then ready for the next I four months deployment.
The message recording via a hand held microphone is completely user friendly, can accept any language with the ability, if used in short term deployment applications, to merely record the new location message. For example, moving a unit to a new location would simply require the new location recording on the correct channel.
The Sentor 740 is specifically designed to be deployed by non- technical personnel in a variety of environments of either permanent or temporary installations and has been allocated a NATO Stock Number. The system is activated by one switch.
We utilise precision optical mirrors within the Passive Infra-Red detection units, which enables false alarm rates caused by small animals to be minimised. Because the detectors are sensing temperature differences, as well as movement, they are unaffected by birds, since their plumage is the same temperature as ambient. There are many possible deployment scenarios for Sensor's portable intruder detection equipment from perimeter to asset protection. All will provide the user with advanced early warning of intrusion.
Example of the Sentor protection pattern
Anyone who moves into the rectangle will be detected. As few as two Sentors can be used to form a secure "bonded" square/rectangle. Pictured within the above diagram is an RAF Hercules in Bosnia protected by Sentor units.
The system can be extended with Sensor's Guardpost product to provide a complete Intruder Detection/ Visual Verification Surveillance package.
SensorEye Range
These Rapid Deployment Cameras offer a versatile and cost effective alternative to conventional CCTV systems. For Police and Local Authorities, the portable cameras are very flexible tool against crime and disorder on city streets. Systems vary from fully functional PTZ and dome cameras to multiple fixed camera systems for wide area protection.
The system comprises the following equipment that can be divided into 2 sub-systems. One sub-system will be housed in an enclosed, secure environment, e.g. a Control Room. The second sub-system will be located elsewhere, operationally.
Control Room System Components
- DVR
- Keyboard
- Monitor
- Tx/Rx Unit
Site System Components
- Luminator mast
- Camera (Fixed or PTZ)
- Tx/Rx Unit
- Lighting Unit
What exactly are Rapid Deployment Cameras?
These Rapid Deployment Cameras are fully self-contained surveillance systems supplied with masts or brackets depending on the user's requirements. With cable-free links for the transmission of video and telemetry over free air space, the equipment requires no costly wiring and may be powered from local mains or integral battery supplies.
Cameras may be monitored and recorded locally with our portable base stations or interfaced with existing networks I for transmission to central monitoring stations.
Sensor's Rapid Deployment Cameras also interface with our portable intruder detection equipment (Sheets 7,8 & 9) to provide complete area protection packages.
How they work
Conventional CCTV systems require cables to link cameras to a monitoring station. Video output and telemetry commands to control the cameras are transmitted via the cables. Sensor's Rapid Deployment Cameras use radio to transmit video and telemetry over free air space and this is not only cheaper in certain circumstances but also allows the cameras to be moved around with greater ease.
System Features
- Choice of configuration – fixed, dome, PTZ, or range of covert options
- High definition monochrome, colour or dualtech colour/mono switchable
- Radio transmission systems based on the international licence exempt Frequency of 2.4 Ghz, the UK licence exempt frequency of 1.394 Ghz or Home Office restricted S Band (for Police use only)
- Encryption to prevent unauthorised interception
- Frame integration or infrared for low light operation
- Motion detection and Peak light inversion
- Choice of mounting arrangements – free standing masts, brackets for buildings, lighting columns etc, vehicle fits
- Local monitoring via portable base stations
- Central monitoring by direct transmission or via interface with existing networks i.e. Fibre optic, coaxial or twisted pair cable, microwave, ISDN/PSTN or GSM telephone networks