SubscribeNetworked remote reporting and alarm activation management for CBRN detectors
NASCAP (Network Alarm System Central Alarm Processor) was originally designed and is manufactured by Argon Electronics LLP for use with the GID-3 chemical agent detector. It is a man portable, ready-to-go rapid deployment system, enabling the augmented use of stand-alone point detectors.
Multiple radio outstations/repeater units are linked to a single flexible architecture base station for safe and efficient monitoring of detector status and enhanced threat reporting.
Creating chemical sentries from remote detectors
NASCAP system features
- Base Station Radio Receiver
Communicates with each Outstation attached to individual detectors, relaying received data to PC. The system has a typical range of 1000m (0.6 miles) within a dense urban environment, and 5000m (3 miles) in an open line of sight environment. A repeater capability permits radio range to be extended as desired (see below). - Radio Antennae
5m (16 ft) cable and clip allows placement of antennae for optimum transmission of signal. - Base Station Mains Power Connection
Supplied with local mains power connection as specified by the end user. - Scanner
Used to determine radio frequencies already in local use prior to operation of the system. - Laptop
When supplied by Argon: semi-rugged removable notebook PC complete with Windows™operating system and pre-loaded with NASCAP software. - Laptop Mains Power Connection
Supplied with local mains power connection as specified by the end user. - User Manual
In English. Translation available at additional cost. - Rugged Peli™Cases
Two lockable wheeled cases provide secure transit for the complete system (locks not supplied). - 6 x Outstations (c/w radio aerial)
Outstations are individually attached to deployed chemical agent detectors by means of click-lock webbing band (supplied). They monitor the status of the detector and transmit information on equipment status, agent alarms, equipment alarms, location, time and GPS data to the Base Station.
In-built movement sensor to detect unauthorized removal of the outstation from its sited location.
Each Outstation can be redeployed as a Base Station providing modular replacement and continued system functionality in the event of damage.
Outstations may also function as signal boosters, either whilst in operation with chemical detectors or as separately powered stand alone units.
For further information including system pricing please contact us directly.
NASCAP system specification
Radio Base Station/Outstations
Pre-set frequency to customer's requirement, with 5 adjacent channels, and user selectable 5 Watt ERP 12.5 KHz channel spacing radio transceiver complete with antenna. Typical frequency 400.00 MHz to 480.00 MHz, with other bands such as 320 to 400 MHz available to special order.
High quality GPS position reporting system is able to gain GPS lock within 30 seconds even when placed in an urban environment with limited satellite view. Note: To maintain the facility to obtain a fast GPS lock the NASCAP system requires that the almanac in the system software, relating to satellite positions in the region in which the system is being used, is updated at least every 2 months.
Power consumption: Minimized to typically 10% of ACADA battery life.
Operating temperature range: -20°C (-4°F) to +50°C (+122°F).
Weight (without detector): 1.36kg (3 lbs)
Dimensions (incl. rubber mounting blocks, excl. aerial and GPS):
146mm (W) x H 222mm (H) x 69mm (D) (5.7" (W) x 8.7" (H) x 2.7" (D))
Scanner
Alinco DJ-X3 T/E wide-band communication receiver.
Laptop
Supplied with minimum specification of Pentium 4™processor, 1.8GHz CPU, 256MB RAM, 1024 x 768 screen resolution, integrated audio system (for audible alarm), 1 x D sub 9 pin serial com port, 1 x USB (1.1>) port, and Windows 2000™or Windows XP™operating system.
20GB shock mounted hard drive, removable for data security.
System Cases
Waterproof mil-spec Peli™cases, model 1610, are used for both Base Station and Outstation.
Case dimensions: 625mm (W) x 495mm (H) x 305mm (D)
(24.6" (W) x 19.5" (H) x 12" (D)).
Base Station weight (when fully loaded): TBC subject to customer system equipment specification.
Outstation weight (fully loaded with 6 outstations): approx. 19 kg (41 lbs).
Detectors
The NASCAP system can be used with the GID-3 or RAID XP.
Variants for other detectors on request.
Argon Electronics LLP also offers individually tailored training programs for NASCAP system set-up and operation.
A typical package would include 1 days training for up to 10 persons in country.
Please contact us for further details.
NASCAP system in use
Alarm reporting software with alpha numeric alarm report detailing:
- Identification of class of chemical agent
- Specific agent identification (in place of class) if available from detector.
- Dose of agent in bars.
- Detector fault codes.
- Status of power supply.
- Identity of detector.
- Status of radio nodes.
- Physical location of detector (grid reference or user selected place name).
- Grid reference provided automatically by GPS (manual entry if no lock available).
- Data logging of all alarm conditions with time and date stamp; data retained for record/evidential purposes.
- Software interfaces for reporting systems.
The NASCAP system is fully compatible with NBCWaRN™(Nuclear, Biological, and Chemical Warning and Reporting Network) software from OptiMetrics, Inc.
Features of this system include
- The same core software used in the nextgeneration US military JWARN system.
- Fully compliant with the latest NATO standards: ATP-45 (B) & AEP-45 Change 1.
- Support for advanced hazard prediction models HPAC and VLSTrack.
- Network or stand-alone operation.
Please note that NBCWaRN™is not supplied with The NASCAP system.
The NASCAP system is fully compatible with MIDAS-AT™(Meteorological Information and Dispersion Assessment System - Anti Terrorism) software from ABS Consulting, Inc.
Please note that MIDAS-AT™is not supplied with the NASCAP system.
For details of this and other compatible modeling systems please contact Argon Electronics LLP.
Argon Electronics LLP is a world leader in simulation systems for CBRN detectors. A free Training Equipment Guide on CD-ROM is available on request.
