SubscribeAir Traffic Control in particular is of major concern as air transport is increasing at a phenomenal rate and the safety implications are critical.
M350 ATC Tower Console Display
The Console Display provides a clear indication of time or date information, and has been primarily designed for use in Air Traffic Control Towers.
The display indicates time in hours, minutes and seconds using high intensity seven segment LED digits. A brightness control is included which allows the display illumination to be optimised for the ambient lighting conditions. The display can also indicate either Universal Co-ordinated Time (UTC) or Local Time by means of a front panel selection switch.
The display can receive accurate time from a Master Clock via its integral RS422/RS232 data interface. A range of protocols is provided in the unit, allowing it to operate in many different equipment configurations and with a variety of Master Clocks.
The Air Traffic Control Tower Console Display is powered from a DC supply, and can be used with a wide range of supply voltages.
The display is designed for mounting in a control console. The unit dimensions conform to the industry standard console specification, allowing it to be readily incorporated into a console design.
Product Specifications
Display Dimensions Full details of the display dimensions are contained in the product literature.
Display Technology 7 Segment High Intensity LED. 6 Digit, 8mm high digits.
Display Colours Red, Green, or Yellow
Display Brightness Manual control, using front panel buttons, selectable in 16 stages.
Display Options Manual control, using front panel buttons with selectable UTC Time, Local Time or Date information.
Master Clock Data Interface A serial interface is provided for receipt of time data from the Master Clock. The interface is factory configurable for either RS232 or RS422 standard.
Master Clock Data Protocol A range of data protocols are available for use with this display. Please consult the Sales Office for full details.
Power Source Three options for power supply voltage are available, Option 1(9-18 V DC); Option 2 (18-36 V DC); Option 3 (36-72 V DC)
Power Consumption 10 Watts
Temperature 0°C to +40°C
Humidity Up to 95% RH (Non-condensing)
EMC CE Compliant
Note As we are always seeking to improve our product, the information in this document only provides general indications of product capability, suitability and performance, none of which shall form any part of any contract.