New flat panel COTS antennas for 4.4 to 5.0GHz military communication frequencies

European Antennas Ltd

Category: Military Communication Frequencies | 16/05/2007 - 13:50:57

The company has found that usage has also increased in other countries as national governments allocate subsections of this band.

The 4.4 to 5.0GHz band with its wider bandwidth is providing greater flexibility and security for communication systems. A major advantage is that commercially available radio systems based on WLAN and WiMAX technologies can be converted to this military designated band enabling a system to be developed and deployed quickly.

These two new directional antennas have well defined, low sidelobe patterns for use within military and homeland security applications for point-to-point single-hop data links and as the "subscriber" in point-to-multipoint systems.

The antennas are of robust construction with aluminium housings and flat, glass fibre radomes, extremely slim for a discreet appearance and available in dark green, black, or tan. Other customisations can be undertaken.

The 'one-foot' antenna, reference FPA20-47V/1323, has 20dBi gain, 14° azimuth by 14° elevation beam pattern, and measures 225mm square by 22mm (10.42 by 1inch).

The 'two-foot' antenna, reference FPA26-47V/1322, has 26dBi gain with 6° azimuth by 6° elevation beam pattern, and measures 600mm square by 24mm (23.62 by 1inch). Both are available with optional mounting kits to suit most types of installation.

These developments complement the existing range of over twenty antennas within the 4.4-5.0GHz band. This range includes sector and multi-sector antennas, low gain wide angle antennas and omni-directional antennas with gains from 2dBi to 9dBi. Many have circular polarisation which is favoured for ground to air communications, helicopters and UAVs. Further developments in this band include dual polarised and multi-panel sector antennas where diversity is required for COFDM applications.Military Communication Frequencies

These two new antennas are part of the European Antennas growing range of COTS antennas used in defence applications but providing commercial prices and development timescales.

All antennas are modelled, developed, tested and manufactured on site to ensure that specifications are optimised. The company's spherical near field test facility ensures that prototype and manufactured antennas meet radiation pattern requirements and quoted specifications. Full support documentation is available.

General information about European Antennas
European Antennas Ltd was formed in 1991 and specialise in the design and manufacture of directional flat panel and sector antennas and omni-directional antennas within the range 100MHz to 40GHz. Manufactured at their UK plant, their antennas are used worldwide by military and commercial organisations within satellite, data, wireless LAN, telemetry, security, surveillance and outside broadcast communication systems. European Antennas Ltd is part of the Cobham Antennas Division.